Working principle of heavy hammer crusher: The motor drives the rotor at a high -speed rotation in the crushing cavity, and the material is given from the material from the upper part to the machine.

In the lower part of the rotor, the grain level with sieve plates and crushing materials is discharged through sieve plates with small sieved size, and rough grains larger than the size of the sieve holes are stranded on the sieve plate to continue to be hit and grinded by the hammer. Outside the crusher.

The reasons and elimination methods of the heavy hammer crusher predict

When the vibration volume increases or assembled the hammer, the rotor is not well balanced to remove the hammer, and the quality of the hammer is selected as required, so that the total quality of the hammer on the hammer shaft in each row of the hammer shall meet the requirements of the hammer shaft.

1. Decrease production

1. The gap between the sieve bar is blocked

2. Unewed materials 1. Clear the blockage in the gap in the sieve after parking

2. Adjust the feeding mechanism

Second, knocking out inside the machine

1. Materials that cannot be broken into the machine into the machine

2. Line plate fastener loose, hammer impact on the lining plate

Third, hammer or other parts break

1. Clean up the broken cavity after parking

2. Check the tightness of the lining board, the hammer and sieve bar